Alti-link Communication Co.,Limited
PTP 5-23/5-N operating system ensures easy and rapid deployment of your point-to-point links and rock-solid performance once the links are deployed. Fresh responsive design user interface adjusts layout based on the size of your screen. Link setup wizard guides through the most important steps when setting up the link. PTP 5G links support single side configuration when parameters set on the master side are automatically applied on the slave unit simultaneously. This simplifies and shortens link configuration. Essential tools including link test, antenna alignment, spectrum analyzer, site survey and etc. are implemented to make the setup and trouble-shooting of the links efficient and straightforward. Automatic mechanisms like auto-channel and automatic transmit power control optimize the link for maximum performance even in the areas with high interference.
Extremely high 750 Mbps capacity and carrier grade performance is ensured by a professional and powerful RF design supporting up to 256QAM modulation and 31 dBi (combined) radio output power with a total system gain of 172 dB. Proprietary protocol for data transmission (W-Jet V) specifically engineered for the PTP scenario delivers high performance even on a long distance links with high interference and stabilizes the latency to 2-4 ms range.
Rock solid and easy to use mounting bracket ensures high wind-load survival and rapid deployment of the link. 45°integrated antenna tilt option increases flexibility when deploying links in a noisy areas. GORE-TEX gland allows pass-through of water vapor in humid conditions. Detachable handle makes it easy to carry the devices and works as additional tightening option of the device. Newly designed RGB LEDs indicate different devices statuses and signal level when aligning the antenna in 1 dBm step.
New 1.2 GHz CPU dedicated for data processing delivers extremely high 250k PPS rate and swift performance of the PTP link. 2 x gigabit Ethernet ports with PoE pass-through allow building 1+1 (failover) or repeater links and also make PTP 5G Series ideal for video surveillance scenarios. The ports are made according to 802.3at standard compliant. An integrated surge and ESD protection is designed according to IEC standards and passes class 4 requirements.
Additional 2.4 GHz radio allows accessing your device wireless connecting with any type of device. This is extremely helpful when installing and setting up PTP links and then troubleshooting them in a difficult to reach conditions. Tests shown the radio is accessible even standing 20 meters away from a 10-story building when device is mounted on the top of the building
Specifications
|
Radio |
|
|
Wireless Protocol |
W-Jet V |
|
Radio Mode |
MIMO 2×2 |
|
Frequency Range |
5.1–5.9GHz |
|
Channel Size |
5, 10, 14, 15, 20, 30, 40, 60, 80MHz |
|
Modulation Schemes |
OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK) |
|
Data Rates @ 80MHz |
866, 780, 650, 585, 520, 390, 260, 195, 130, 65Mbps |
|
Duplexing Scheme |
TDD |
|
Error Correction |
BCC, LDPC |
|
Automatic TPC |
Supported |
|
Modulation, Mbps |
866 |
780 |
650 |
585 |
520 |
390 |
260 |
195 |
130 |
65 |
|
Tx Power, dBm |
25 |
26 |
26 |
27 |
27 |
28 |
29 |
30 |
30 |
31 |
|
Receive Sensitivity, dBm |
-71 |
-73 |
-77 |
-79 |
-80 |
-84 |
-87 |
-92 |
-94 |
-97 |
|
Antenna |
|
|
PTP 5-23 |
Integrated Directional Dual-Pol 23dBi Panel |
|
PTP 5-N |
2 N-type Connectors |
|
Wired |
|
|
First Interface |
10/100/1000 Base-T with PoE IN (RJ45) |
|
Second Interface |
10/100/1000 Base-T with PoE OUT (RJ45) |
|
Physical |
|
|
Dimensions without mount: |
|
|
PTP 5-23 |
Length 379mm (14.9‘’), Width 387mm (15.2‘’), Height 51mm (2‘’) |
|
PTP 5-N |
Length 399mm (15.7‘’), Width 174mm (6.8‘’), Height 47mm (1.8‘’) |
|
Mount Length Till Pole |
124mm (4.8‘’) |
|
Weight including mount: |
|
|
PTP 5-23 |
3.9kg (8.5lb) |
|
PTP 5-N |
2.9kg (6.3lb) |
|
Power |
|
|
Power Input Method |
PoE 802.3at, Isolated 42–57VDC |
|
Max Power Consumption |
8.6W |
|
Power Output Method |
PoE 802.3af, 48VDC, 12.95W Maximum |
|
Packing |
PoE Inserter and AC/DC Adapter are Included |
|
Environmental |
|
|
Operating Temperature |
–40°C (–40°F) ~ +65°C (+149°F) |
|
Humidity |
0~90% (Non-Condensing) |
|
Software features |
|
|
• Wizard for fast link setup |
|
|
• Centralized control from master: |
|
|
• Smart Auto-channel |
|
|
• Robust data security |
|
|
• QoS with hardware acceleration |
|
|
• Spectrum analyzer |
|
|
• Wireless signal and device state indication on RGB LEDs |
|
|
• Dual firmware image |
|
|
Management |
|
|
Dedicated 2.4GHz Radio for Management |
|
|
System Monitoring |
SNMP, GUI/HTTP(S), Shell/SSH and WNMS |
|
System Configuration |
GUI/HTTP(S) and WNMS |
Antenna Specification
|
Antenna |
|
|
Frequency range |
5.1–5.9GHz |
|
Gain |
23 dBi |
|
Polarization |
Dual linear |
|
Cross-pol Isolation |
27dBi |
|
VSWR |
1.5:1 |
|
Azimuth beamwidth (H pol) |
8° |
|
Azimuth beamwidth (V pol) |
8° |
|
Elevation beamwidth |
8° |
Typical Application
|
Electrical specifications |
|||
|
DC input voltage range |
44.0–57.0V |
Physical specifications |
|
|
IEEE 802.3af/at compliant |
POE output |
DC input |
|
|
Output power |
up to 28W |
Data input +power jack |
RJ45 |
|
Power output |
RJ45 pins 1,2,4,5 (+) and 3,6,7,8 (-) |
Dimensions |
117×87×34mm |
|
Data rate |
10/100/1000Mbps |
Weight |
270g |
|
Surge protection |
2kV line to line, |
Operating temperature |
–40 to +65C |
|
|
6kV line to ground (output port) |
UTP/FTP cable length |
100m total (from switch to the device) |
