Alti-link Communication Co.,Limited
The S5710 series supports high-density 10G SFP+ ports and 2*100G QSFP32 ports, Providing targeted solutions for large-flow data exchange in data centers, simplifying the network structure and reducing network maintenance costs.
The switch not only supports the traditional STP/RSTP/MSTP spanning tree protocol, but also supports the G.8032 international standard ERPS protocol issued by ITU-T. This standard can realize 50ms fast loop recovery under Ethernet ring network. One switch can connect to multiple aggregation switches through multiple links, significantly improving the reliability of access devices.
Support static route
Support dynamic route such as RIP, OSPF,BGP, IS-IS
Support IPV4/IPV6 dual protocol stack,Support RIPng、OSPFv3
Support DHCP Server and DHCP Relay,L2-Tunnel
Support Ethernet OAM protocol such as CFM、EFM
The hardware based ACL processing mechanism is adopted to ensure the control requirements of Gigabit high-speed forwarding; it supports ACL access control from the second to the seventh layer, which can be based on the source and destination MAC addresses, source and destination IP addresses, UDP/TCP port numbers, and IP addresses. The protocol type and other information classify the data flow, and set the access control rules according to the data classification. You can set permit or deny, and then apply the rules to VLANs or physical ports; support the global ACL function, which expands the number of effective ACL entries, which is convenient The use and maintenance of customers.
S5863-24X2C can work with the industry's mainstream virtualization platforms and acts a hardware gateway on an VxLAN overlay network. Virtual extensible LANs (VxLAN), a common network virtualization overlay protocol that expands the layer 2 network address space from 4,000 to 16 million.
Model |
S6865-56YC |
S6862-54XC |
S5863-24X2C |
Routing Layer |
Layer3 |
Layer3 |
Layer3 |
Chipset SoC |
Centec CTC8180 |
CTC8096 |
CTC7132 |
LAN port |
48 * 25G SFP32 |
48* 10G SFP+ |
24* 10G SFP+ |
Uplink port |
8* 100GE QSFP28 |
2* 40GE QSFP 4* 100GE QSFP28 |
2* 100G QSFP28 |
Mgmt port |
1* Console/1* MGMT |
1* Console/1* MGMT |
1* Console/1* MGMT |
USB port |
1* USB 2.0 |
1* USB 2.0 |
1* USB 2.0 |
Performance |
|
|
|
Switch fabric speed |
2.4 Tbps |
1.92T |
880Gbps |
Forwarding rate |
2976 Mpps |
1428Mpps |
654Mbps |
MAC address table |
160K |
64K |
128K |
ARP table |
32k |
32k |
32k |
ACL table |
2K |
6K |
2K |
Routing Table (IPv4) |
384K |
64k |
64k |
Packet buffer |
36MB |
9MB |
4.5MB |
Flash |
1G |
1G |
8G |
Memory |
2G |
2G |
1G |
Physical |
|
|
|
Size |
437*390*44(mm) |
437*390*44(mm) |
440×320×44 mm |
Power consumption |
≤180W |
≤180W |
≤125W |
Power supply |
2* Hot-swap CRPS (FRU) |
2* Hot-swap CRPS (FRU) |
2* Hot-swap CRPS (FRU) |
Cooling system |
5* Hot-swap FAN (FRU) |
5* Hot-swap FAN (FRU) |
2* Hot-swap slot (2fan/slot) |
Airflow |
Front to rear |
Front to rear |
Front to rear |
Ethernet |
|
|
|
Ethernet interface operating modes |
● |
● |
● |
Ethernet interface operating rates |
● |
● |
● |
Jumbo Frame |
● |
● |
● |
Port enable/disable |
● |
● |
● |
Flow-control TX/RX |
● |
● |
● |
Port based storm-control |
● |
● |
● |
Unicast/multicast/broadcast storm-control |
● |
● |
● |
Port-isolate |
● |
● |
● |
Cut-through |
● |
● |
● |
VLAN |
|
|
|
802.1QVLANs |
● |
● |
● |
Port-based VLAN |
● |
● |
● |
Protocol-based VLAN |
● |
● |
● |
IP subnet based VLAN |
● |
● |
● |
Voice VLAN |
● |
● |
● |
Mac VLAN |
● |
● |
● |
Super VLAN |
● |
● |
● |
GVRP |
● |
● |
● |
VLAN Swap |
● |
● |
● |
802.1ad Vlan Stacking (QinQ) |
● |
● |
● |
Flexible QinQ |
● |
● |
● |
MAC Address |
|
|
|
Automatic learning and aging of MAC addresses |
● |
● |
● |
Hardware Learning |
● |
● |
● |
Static and dynamic MAC address entries |
● |
● |
● |
Blackhole MAC |
● |
● |
● |
Link Aggregation |
|
|
|
Static-LAG & LACP |
● |
● |
● |
LAG load balance(SIP/DIP/SMAC/DMAC) |
● |
● |
● |
Spanning-Tree |
|
|
|
IEEE 802.1D STP/802.1w RSTP/802.1s MSTP |
● |
● |
● |
IEEE 802.3ad LACP |
● |
● |
● |
Virtual Cable Testing |
● |
● |
● |
DDM |
● |
● |
● |
LLDP / LLDP-MED |
● |
● |
● |
VRRP |
● |
● |
● |
Root Guard |
● |
● |
● |
Loop guard |
● |
● |
● |
ERPS (ITU-T G.8032) |
● |
● |
● |
ERRP |
● |
● |
● |
Smart Link (Flexlink) |
● |
● |
● |
Loopback-detection |
● |
● |
● |
Layer2 Multicast |
|
|
|
IGMPv1/v2/v3 Snooping |
● |
● |
● |
Fast leave |
● |
● |
● |
Static IGMP snooping group |
● |
● |
● |
MVR |
● |
● |
● |
ARP |
|
|
|
Static and dynamic ARP entries |
● |
● |
● |
Aging of ARP entries |
● |
● |
● |
Gratuitous ARP |
● |
● |
● |
basic/Local ARP-Proxy |
● |
● |
● |
IPv4 Routing |
|
|
|
IPv4 Static Routes |
● |
● |
● |
uRPF check |
● |
● |
● |
RIPv1/v2 |
● |
● |
● |
OSPFv2 |
● |
● |
● |
IS-IS |
● |
● |
● |
BGP |
● |
● |
● |
ICMP redirect |
● |
● |
● |
ICMP unreachables |
● |
● |
● |
ECMP |
● |
● |
● |
IGMPv1/v2/v3 |
● |
● |
● |
IGMP-Proxy |
● |
● |
● |
IGMP SSM Mapping |
● |
● |
● |
PIM-SM |
● |
● |
● |
PIM-SSM |
● |
● |
● |
PIM-DM |
● |
● |
● |
IPv6 Routing |
|
|
|
IPv6 Static Routes |
● |
● |
● |
RIPng |
● |
● |
● |
BGP4+ |
● |
● |
● |
OSPFv3 |
● |
● |
● |
IS-IS |
● |
● |
● |
MLD v1/v2 |
● |
● |
● |
MLD v1/v2 Snooping |
● |
● |
● |
BFD for OSPFv2 |
● |
● |
● |
ICMPv6 |
● |
● |
● |
NDP |
● |
● |
● |
PMTU |
● |
● |
● |
Virtualization |
|
|
|
IPv6 VxLAN tunnel |
● |
● |
● |
Static Distributed VxLAN |
● |
● |
● |
Centralized Gateway VxLAN |
● |
● |
● |
IPRAN |
● |
● |
● |
QoS |
|
|
|
802.1p Priority Queues per Port |
● |
● |
● |
SP(Strict Priority)scheduling |
● |
● |
● |
WRR(Weighted Round Robin)scheduling |
● |
● |
● |
SP + WRR mixed scheduling |
● |
● |
● |
Port based traffic shaping |
● |
● |
● |
Queue based traffic shaping |
● |
● |
● |
Port/VLAN/Flow/Aggregated flow base traffic policing |
● |
● |
● |
Packet counts and bytes statistics |
● |
● |
● |
Flow redirection |
● |
● |
● |
Flow mirror |
● |
● |
● |
IPv4-v6 QoS(QCEs) |
● |
● |
● |
System Security |
|
|
|
SSHv1/v2 |
● |
● |
● |
RADIUS |
● |
● |
● |
TACACS+ |
● |
● |
● |
Authentication |
● |
● |
● |
Accounting |
● |
● |
● |
Port based dot1x |
● |
● |
● |
MAC based dot1x |
● |
● |
● |
MAC/IP ACL |
● |
● |
● |
Basic Mode ACL |
● |
● |
● |
Port/VLAN/L4-Port ACL |
● |
● |
● |
Time Range |
● |
● |
● |
ARP Inspection |
● |
● |
● |
IP Source Guard |
● |
● |
● |
Limitation on MAC address learning on interface |
● |
● |
● |
Limitation on MAC address learning on VLAN |
● |
● |
● |
Rate limit |
● |
● |
● |
CPU Traffic Limit |
● |
● |
● |
Anti- DDOS attack |
● |
● |
● |
CLI/WEB/SNMP/Telnet/SSH filtering |
● |
● |
● |
Network Management |
|
|
|
GUI (Web) |
● |
● |
● |
Telnet / SSH |
● |
● |
● |
CLI (Vty Level) |
|
|
|
SNMP v1/v2c/v3 |
● |
● |
● |
TFTP/FTP |
● |
● |
● |
Configuration backup and restore |
● |
● |
● |
DNS Client |
● |
● |
● |
DHCP Client/Relay/Server |
● |
● |
● |
DHCP Snooping |
● |
● |
● |
DHCP option 60/82 |
● |
● |
● |
SNTP / NTP |
● |
● |
● |
RFC3176 sFlow |
● |
● |
● |
Port Mirroring per IP/TCP/UDP |
● |
● |
● |
RSPAN |
● |
● |
● |
RMON |
● |
● |
● |
Stacking (VST) |
N/A |
N/A |
N/A |
IEEE 802.3ah EFM |
● |
● |
● |
IEEE 802.1ag CFM |
● |
● |
● |
IEEE 802.1ag Y.1731 |
● |
● |
● |
Public and private MIB |
● |
● |
● |
Public and private Trap |
● |
● |
● |
Maintenance |
|
|
|
per-module Debug features |
● |
● |
● |
ICMP Debug |
● |
● |
● |
CPU usage display and alarm |
● |
● |
● |
Memory usage display and alarm |
● |
● |
● |
Device temperature、PSU、FAN、status display and alarm |
● |
● |
● |
User operation logs |
● |
● |
● |
Management of logs, alarms, and debugging information |
● |
● |
● |
Detailed Diagnostic-information collection |
● |
● |
● |
Manual /Schedule reboot |
● |
● |
● |
Reboot Information logging |
● |
● |
● |
Ping |
● |
● |
● |
IPv6 Ping |
● |
● |
● |
Traceroute |
● |
● |
● |
Port/Flow/Remote mirror |
● |
● |
● |
Multi-destination mirror(m:n) |
● |
● |
● |
To CPU/From CPU packets statistics |
● |
● |
● |
Port loopback |
● |
● |
● |
hardware loopback(internal/external) |
● |
● |
● |
Time configuration |
● |
● |
● |
Timezone |
● |
● |
● |