Alti-link Communication Co.,Limited
The PTP 6-an extension of the time-tested PTP line of wireless data transfer devices -empowers users to deliver superb connectivity over 6GHz frequencies. The 6GHz band provides more leg room for all types of wireless networks, allowing users to find minimally crowded channels, experience less noise and interference, and achieve greater range and throughput.
The PTP operating system ensures easy and rapid deployment of point-to-point links with stable, fast performance. An intuitive and responsive user interface adjusts the layout based on the size of your screen. Essential tools including Setup Wizard, link test, antenna alignment, spectrum analyzer, and site survey are included to make set-up and troubleshooting more efficient. Automatic mechanisms such as auto-channel and automatic transmit power control optimize the link for maximum performance even in areas with high interference.
PTP 6G Series delivers an extremely high 700Mbps throughput via its unique and powerful RF design that supports up to 256-QAM modulation and 30dBm output power. Our proprietary W-Jet V protocol, specifically engineered for high performing PTP scenarios, minimizes interference even across long distances and stabilizes latency within 2-4 ms.
In addition to achieving maximum performance, Alti-link focuses on delivering flexibility and ease-of-use in our
PTP 6G Series series. The robust mounting bracket enables rapid deployment of the links and ensures survivability during high wind-load. The integrated antenna possesses a 45° rotation option which increases installation flexibility; especially advantageous in noisy spectrum areas. A GORE© membrane vent allows fast pressure equalization of the IP-67 rated cast aluminum enclosure to prevent condensation and to ensure seal performance . A detachable handle eases transporting the devices up towers and over rough terrains. Newly designed RGB LEDs indicate different device statuses and signal levels (in 1dBm steps) when aligning the antenna
The PTP 6G Series delivers powerful performance with its new 1.2GHz CPU dedicated for data processing and high (200,000) packet per second delivery. Equipped with two Gigabit Ethernet ports, one with PoE passthrough, the unit allows for 1+1 (failover) or repeater links and is ideal for high-security video surveillance scenarios. PTP 6G Series incorporates integrated surge and ESD protection according to IEC standards and passes Class 4 requirements.
An internal 2.4GHz radio allows access into the PTP 6G Series GUI by wireless connection with any WIFI equipped device. This feature expedites the installation of links and alleviates the problem of troubleshooting in difficult-to-reach locations. Tests prove accessibility even when mounted on top of a 10-story building while standing 20 meters (65ft) away!
Specifications
|
Radio |
|
|
Wireless Protocol |
W-Jet V |
|
Radio Mode |
MIMO 2×2 |
|
Frequency Range |
5.900–6.400GHz |
|
Channel Size |
5, 10, 14, 15, 20, 30, 40, 60, 80MHz |
|
Modulation Schemes |
OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK) |
|
Data Rates @ 80MHz |
866, 780, 650, 585, 520, 390, 260, 195, 130, 65Mbps |
|
Duplexing Scheme |
TDD |
|
Error Correction |
BCC, LDPC |
|
Automatic TPC |
Supported |
|
Modulation, Mbps |
866 |
780 |
650 |
585 |
520 |
390 |
260 |
195 |
130 |
65 |
|
Tx Power, dBm |
24 |
25 |
26 |
27 |
28 |
30 |
30 |
30 |
30 |
30 |
|
Receive Sensitivity, dBm |
-71 |
-73 |
-77 |
-79 |
-80 |
-84 |
-87 |
-92 |
-94 |
-97 |
|
Antenna |
|
|
PTP 6-25 |
Integrated Directional Dual-Pol 25dBi Panel |
|
PTP 6-N |
2 N-type Connectors |
|
Wired |
|
|
First Interface |
10/100/1000 Base-T with PoE IN (RJ45) |
|
Second Interface |
10/100/1000 Base-T with PoE OUT (RJ45) |
|
Physical |
|
|
Dimensions without mount: |
|
|
PTP 6-25 |
Length 379mm (14.9‘’), Width 387mm (15.2‘’), Height 51mm (2‘’) |
|
PTP 6-N |
Length 399mm (15.7‘’), Width 174mm (6.8‘’), Height 47mm (1.8‘’) |
|
Mount Length Till Pole |
124mm (4.8‘’) |
|
Weight including mount: |
|
|
PTP 6-25 |
3.9kg (8.5lb) |
|
PTP 6-N |
2.9kg (6.3lb) |
|
Power |
|
|
Power Input Method |
PoE 802.3at, Isolated 42–57VDC |
|
Max Power Consumption |
8.6W |
|
Power Output Method |
PoE 802.3af, 48VDC, 12.95W Maximum |
|
Packing |
PoE Inserter and AC/DC Adapter are Included |
|
Environmental |
|
|
Operating Temperature |
–40°C (–40°F) ~ +65°C (+149°F) |
|
Humidity |
0~90% (Non-Condensing) |
|
Software features |
|
|
• Wizard for fast link setup |
|
|
• Centralized control from master: |
|
|
• Smart Auto-channel |
|
|
• Robust data security |
|
|
• QoS with hardware acceleration |
|
|
• Spectrum analyzer |
|
|
• Wireless signal and device state indication on RGB LEDs |
|
|
• Dual firmware image |
|
|
Management |
|
|
Dedicated 2.4GHz Radio for Management |
|
|
System Monitoring |
STP/SNMP (V1), GUI/HTTP(S), Shell/SSH and Infinity Controller |
|
System Configuration |
GUI/HTTP(S) |
Antenna Specification
|
Antenna |
|
|
Frequency range |
5.1–5.9GHz |
|
Gain |
23 dBi |
|
Polarization |
Dual linear |
|
Cross-pol Isolation |
27dBi |
|
VSWR |
1.5:1 |
|
Azimuth beamwidth (H pol) |
8° |
|
Azimuth beamwidth (V pol) |
8° |
|
Elevation beamwidth |
8° |
Typical Application
|
Electrical specifications |
|||
|
DC input voltage range |
44.0–57.0V |
Physical specifications |
|
|
IEEE 802.3af/at compliant |
POE output |
DC input |
|
|
Output power |
up to 28W |
Data input +power jack |
RJ45 |
|
Power output |
RJ45 pins 1,2,4,5 (+) and 3,6,7,8 (-) |
Dimensions |
117×87×34mm |
|
Data rate |
10/100/1000Mbps |
Weight |
270g |
|
Surge protection |
2kV line to line, |
Operating temperature |
–40 to +65C |
|
|
6kV line to ground (output port) |
UTP/FTP cable length |
100m total (from switch to the device) |
