S5710-54TX
S5710-54TX
S5710-54TX
S5710-54TX
S5710-54TX
S5710-54TX
S5710-54TX
S5710-54TX

Layer3 48-port Gigabit Switch with 10G uplink

S5710-54TX

  • 48* 10/100/1000M Base-T RJ45 port
  • 6* SFP/10G SFP+ port
  • RTL9311 chipset
  • 216Gbps Switching capacity

Características

10 Gigabit Aggregation

The S5710 series supports high-density Gigabit ports and 10 Gigabit SFP+ ports, Providing targeted solutions for large-flow data exchange in data centers, simplifying the network structure and reducing network maintenance costs.

Carrier-level high availability

The switch not only supports the traditional STP/RSTP/MSTP spanning tree protocol, but also supports the G.8032 international standard ERPS protocol issued by ITU-T. This standard can realize 50ms fast loop recovery under Ethernet ring network. One switch can connect to multiple aggregation switches through multiple links, significantly improving the reliability of access devices.

Layer3 routing and enhanced multi-service

Support static route
Support dynamic route such as RIP, OSPF,BGP, IS-IS
Support IPV4/IPV6 dual protocol stack,Support RIPng、OSPFv3
Support DHCP Server and DHCP Relay,L2-Tunnel
Support Ethernet OAM protocol such as CFM、EFM

Hardware based ACL control

The hardware based ACL processing mechanism is adopted to ensure the control requirements of Gigabit high-speed forwarding; it supports ACL access control from the second to the seventh layer, which can be based on the source and destination MAC addresses, source and destination IP addresses, UDP/TCP port numbers, and IP addresses. The protocol type and other information classify the data flow, and set the access control rules according to the data classification. You can set permit or deny, and then apply the rules to VLANs or physical ports; support the global ACL function, which expands the number of effective ACL entries, which is convenient The use and maintenance of customers.

Full QoS policy and Q-in-Q for campus or carrier network

The switch fully implements the DIFFSERV model, provides up to 8 QoS queues, supports DSCP/TOS/802.1P and other QoS methods, SP, SRR, WRR, WFQ and hybrid scheduling and other priority queue scheduling algorithms, which can achieve port speed limit QoS functions such as traffic shaping to meet customer network requirements for data processing priority; support port trust, configurable trust CoS, DSCP, IP priority, port priority, and modify the DSCP and CoS values of data packets; according to the port , VLAN, DSCP, IP priority, ACL table to classify the traffic, modify the DSCP and IP priority of the data packet, and specify different bandwidths to provide different service quality for voice/data/video transmission in the same network. Support QinQ function, encapsulate the user's private network VLAN tag in the public network VLAN tag, so that the message will pass through the backbone network with two layers of VLAN tag to realize the intercommunication of the user's private network.

Normas

Model

S5710-12TX

S5710-28TX

S5710-28TX-P

S5710-54TX

Port

8*1G RJ45

4 *10G SFP+

24*1G RJ45

4 *10G SFP+

24*1G RJ45/PoE

4 *10G SFP+

48*1G RJ45

6 *10G SFP+

Chipset

RTL9301

RTL9301

RTL9301

RTL9311

Switching capacity

128Gbps

128Gbps

128Gbps

216Gbps

forwarding rate

95Mbps

95Mbps

95Mbps

160Mbps

MAC

16K

16K

16K

32K

Multicast

1K

1K

1K

4K

ARP table

2K

2K

2K

8K

Routing table

512

512

512

12K

PoE budget

N/A

N/A

400W(af/at)

N/A

Memory

Memory:512MB, storage:32MB

Power supply

AC: 100~240V 47/63Hz;

Power consumption

≤22W

≤22W

≤450W

≤30W

Dimensions
WxDxH)

260X210X44mm

440X210X44mm

440X270X44mm

440×290×44mm

Temperature

Working Temperature:-10℃~55℃

Storge temperature:-40℃~70℃

Humidity

Operating humidity: 10%~95% (non-condensing)

Storage humidity: 10%~95% (non-condensing)  

 

Software

Specification

S5710-12TX

/28TX(P)

S5710-54TX

 

Ethernet

Ethernet interface operating modes(full duplex, half duplex, and auto-negotiation)

Ethernet interface operating rates

Jumbo Frame

Port enable/disable

Flow-control tx/rx

Port based storm-control

Unknow-unicast/unknow-multicast/broadcast storm-control

Port-isolate

Cut-through

VLAN

Access/Trunk/Hybrid

4K VLAN

Default VLAN

VLAN Classification(port based/mac based/ip based/protocal based)

Basic QinQ

Flexible QinQ

VLAN Swap

MAC

Automatic learning and aging of MAC addresses

Hardware Learning

Static and dynamic  MAC address entries

blackhole MAC

LAG

Static-LAG & LACP

LAG load balance(SIP/DIP/SMAC/DMAC)

STP

Spanning-Tree Protocol

Rapid Spanning-Tree Protocol

Multi-instance Spanning-Tree Protocol

BPDU Filter/Guard

Root Guard

Loop Guard

ERPS

Single Ring

Sub Ring

Loopback Detect

Loopback-detection

Layer2 Multicast

IGMPv1/v2/v3 Snooping

Fast leave

Static IGMP snooping group

MVR(Multicast VLAN Registration)

ARP

Static and dynamic ARP entries

Aging of ARP entries

Gratuitous ARP

basic ARP-Proxy

local ARP-Proxy

IPv4 Unicast Routing

IPv4 Static Routes

uRPF check

RIPv1/v2

OSPFv2

IS-IS

N/A

BGP

N/A

ICMP redirect

ICMP unreachables

ECMP

IPv4 Multicast Routing

IGMPv1/v2/v3

IGMP-Proxy

IGMP SSM Mapping

PIM-SM

N/A

PIM-SSM

N/A

PIM-DM

N/A

IPv6 Basic Protocol

ICMPv6

N/A

NDP

N/A

PMTU

N/A

IPv6 Unicast Routing

IPv6 Static Routes

RIPng

BGP4+

N/A

OSPFv3

IS-IS

N/A

IPv6 Multicast Routing

MLD v1/v2

N/A

MLD v1/v2 Snooping

N/A

BFD

BFD for OSPFv2

N/A

Stacking

Virtual Stacking Frame

Max support 8 stacking units

VRRP

VRRP

Track for VRRP

Smart Link

FlexLink

Monitorlink

EFM

Auto detection

Network fault detetion

Network fault handle

remote loopback

CFM

Hardware CCM detect

MAC Ping

MAC Trace

Y.1731

Latency and jitter measure

QoS

Traffic classification based on COS/DSCP (simple classification)

Traffic classification based on ACL ( complex classification)

Traffic classification based on inner header of the tunnel packets

Queue scheduling

Remark the priority fields(COS/DSCP) of the packet based on ACL

Flow redirection

Flow mirror

Traffic policing based on direction(in/out)  of Port

Traffic policing based on direction(in/out) of VLAN

Traffic policing based on direction(in/out) of flow

Traffic policing based on direction(in/out) of aggregated flow

Queue based traffic shaping

Port based traffic shaping

SP(Strict Priority)scheduling

WRR(Weighted Round Robin)scheduling

SP + WRR mixed scheduling

Packet counts and bytes statistics based on traffic classification

Packet counts and bytes statistics based on the color after traffic policing

Forwarded and discarded packet counts and bytes statistics

System Security

SSHv1/v2

RADIUS

TACACS+

Authentication

Accounting

Port based dot1x

MAC based dot1x

MAC/IP ACL

Basic Mode ACL

Port/VLAN/L4-Port ACL

Time Range

ARP Inspection

IP Source Guard

Limitation on MAC address learning on interface

Limitation on MAC address learning on VLAN

Rate limit

CPU Traffic Limit

Prevent DDOS attack (ICMP Flood/Smurf/Fraggle/LAND/SYN Flood)

CLI/WEB/SNMP/Telnet/SSH filtering

Network Management

DHCP Server

DHCP Relay

DHCP Snooping

DHCP Option60

DHCP Option82

RMON

RFC3176 sFlow

SNTP(Simple Network Time Protocol)

LLDP

Terminal Services

Configurations through CLI (Command Line Interface)

Vty Terminal service

Console Terminal service

Configuration Management

Inband management interface and configuration

Outband management interface and configuration

privileged user proirity and privileged commands

Network management based on SNMPv1/v2c/v3

Public and private MIB

Public and private Trap

Configuration and management based on WEB

Restore factory default configuration

File System

File system

Upload and download files through FTP or TFTP

Upload and download files through Xmodem

Debugging And Maintenance

per-module Debug features

ICMP Debug

CPU usage display and  alarm

Memory  usage display and  alarm

Device temperature、PSU、FAN、status display and alarm

User operation logs

Management of logs, alarms, and debugging information

VCT(Virtual Cable Test)

Detailed Diagnostic-information collection

Manual reboot

Schedule Reboot

Reboot Information logging

Ping

IPv6 Ping

Traceroute

Port mirror

Flow mirror

Remote mirror

Multi-destination mirror(m:n)

To CPU/From CPU packets statistics

port loopback

hardware loopback(internal/external)

Time configuration

Timezone

Upgrade

upgrade with the local image file

upgrade with the remote TFTP server

Online upgrade Uboot

 

 Ordering Information

Ethernet Switch

S5710-12TX

Layer3 8-port Ethernet access switch, 8* 10/100/1000M Base-T RJ45 port and 4* SFP/10G SFP+ port, 1* Fixed AC: 100~240V, 11”1U Rack-mount

S5710-28TX

Layer3 24-port Ethernet access switch, 24* 10/100/1000M Base-T RJ45 port and 4* SFP/10G SFP+ port, 1* Fixed AC: 100~240V, 19”1U Rack-mount

S5710-28TX-P

Layer3 24-port Ethernet PoE switch, 24* 10/100/1000M Base-T RJ45 PoE port and 4* SFP/10G SFP+ port,IEEE 802.3af/at,PoE budget: 400W, 1* Fixed AC: 100~240V, 19”1U Rack-mount

S5710-54TX

Layer3 48-port Ethernet access switch, 48* 10/100/1000M Base-T RJ45 port and 6* SFP/10G SFP+ port, 1* Fixed AC: 100~240V, 19”1U Rack-mount

Optic Fiber Module

SFP-RJ45

1000M SFP module, RJ45 port

SFP-M-LC-R5

1000M SFP module, multi-mode, 500M, 850nm, LC

SFP-S-LC-20

1000M SFP module, single-mode, 20km, 1310nm , LC

SFP-S-LC-40

1000M SFP module, single-mode, 40km, 1310nm, LC

SFP-S-LC-80

1000M SFP module, single-mode, 80km, 1550nm, LC

SFP+-M-LC-R3

10G SFP+ modules.multi-mode, 300M, 850nm, LC

 

Descargar

S5710-54TX Datasheet